cardinal components cardinal components specifications: frequency range: 3.579545 ~ 38.000 mhz at cut fundamental 25.000000 ~ 75.000 mhz at cut 3rd overtone 26.000000 ~ 48.000 mhz bt cut fundamental operating temperature: -10 c ~ +70 c standard -40 c ~ +85 c frequency stability: 100 ppm 50 ppm standard 30 ppm 15 ppm frequency tolerance: 100 ppm (at 25 c) 50 ppm standard 30 ppm 10 ppm load capacitance: standard 18 pf or series. please specify your required load. resistance: maximum resistance corresponds to frequency. see chart below. standard: mode: fundamental or 3rd overtone shunt capacitance: 7 pf max aging: 5 ppm/year drive level: 1.0 mw max optional features: tape and reel (1k per reel) low profile surface mount crystals cardinal ? at-strip ? surface mount crystals are among the most readily available on the market today. many popular frequencies are kept in stock at our facility. note: not all combinations of the above tolerances, stabilities, and temperature ranges are available. consult the factory if your requirement is not standard. csm1 part numbering example: csm1 z - a1 b2 c2 200 - 3.579545 d18 - 3 * note: the above abc combinations cover basic specification options. we tailor our crystal specifications to meet customer requirements. please contact our sales department if you don ? t see exactly what you need. equivalent series resistance (esr), mode of operation (mode), and cut resistance chart: all resistances are maximum values. frequency mhz esr( ? ) mode/cut frequency mhz esr ( ? ) mode/cut 3.579545~4.999 200 max fund./at 15.000~15.999 60 max fund./at 5.000~5.999 150 max fund./at 16.000~23.999 50 max fund./at 6.000~7.999 120 max fund./at 24.000~30.000 40 max fund./at 8.000~8.999 90 max fund./at 24.000~48.000 40 max fund./bt 9.000~9.999 80 max fund./at 24.576~29.999 150 max 3rd overtone/at 10.000~14.999 70 max fund./at 30.000~75.000 100 max 3rd overtone/at series overtone blank: fund. -3: 3rd ot -5: 5th ot -7: 7th ot -bt: bt cut series csm1 csm1 added features blank = bulk pack z = tape and reel z operating temp. a0 = -10 c ~ +60 c a1 = -10 c ~ +70 c a2 = -40 c ~ +85 c a3 = -55 c ~ +125 c a1* stability b1 = 100 b2 = 50 b3 = 30 b4 = 10 b2 tolerance c1 = 100 c2 = 50 c3 = 30 c4 = 10 c2 resistance see chart below 200 frequency 3.579545 load cap. d16,18,20,etc. ds = series d18 - 3 csm1 cardinal components, inc. 155 route 46 west wayne, nj 07470 rev: c-090414-11 tel: (973)785-1333 e-mail: sales@cardinalxtal.com web: http://www.cardinalxtal.com c-10
|